Thank you for visiting my blog
and for all of the nice
comments. These are the
patches I have used in all of
my Youtube videos. You can
download them and install
them into your own units. If
you find my patches useful
please consider downloading
a song or two from my albums
to help keep my site going. I
am now offering single song
MP3 downloads because I
know lots of people don't
have an iTunes account.
Including Me!! LOL...
Thank you for your support
Loading my POD XT-Live &
X3-Live
• Connect your Line 6 device’s
USB cable to your computer.
• Download and install Line 6
Monkey – it is recommended you
download the latest version of
• Launch Line 6 Monkey and go to
the Updates tab.
• Update your Line 6 device
Driver if necessary.
• Update your Device Firmware
and Flash Memory if Monkey
shows available updates.
• Launch Line 6 Monkey again
with your supported Line 6
hardware connected, and it
should show you GearBox 3 as
an available product in the
Updates tab. Choose GearBox 3
and download the installer.
• Exit Line 6 Monkey.
• Run the GearBox 3 installer,
following the instructions on your
screen.
• Once you have Gearbox
installed on your machine. Make
sure your X3L is connected to
your computer and turned on
then launch Gearbox. The
program will atart and
automatically read all of your
patches on your X3. Once that is
done you are ready to start
loading patches.
• Go to File>Open and point to the
downloaded patches (MAKE
SURE YOU HAVE REMOVED THE
.ZIP FROM THE END OF MY
PATCHES. THEY MUST END IN
l6t). When you open the file it will
load it into your X3 in whatever
preset number your X3 is on at
that time. If you want to save it
just hit the save button on your
X3unit twice. This will save the
preset into that location on your
X3. gearbox has been a little
buggy in the past when it comes
to importing and saving patches
but I’m sure that is all finxed now
in the lates version.
You can use this same procedure
for my XT-Live bundle.
BOSS GT-10 Patches
Line6 POD XT-Live Patches
Loading my GT-10 tones into
your own GT-10:
To load my GT-10 tones into your
own GT-10 you must first
download & install the BOSS GT-
10 USB Driver & the GT-10
Librarian software located here:
Once you have done that you can
download my GT-10 patches from
the links. You can either download
individual patches or my entire
bundle. If you download my entire
bundle YOU MUST UNZIP THE ZIP
FILE BEFORE IT WILL WORK.
The individual patches are already
in the right format for importing
into the Librarian software. Once
you have download the ones you
want here are the instructions:
With your GT-10 connected to
your computer & turned on, open
the Librarian software and go to
File>Import SMF...>"my .mid file".
This will load the patches into the
Librarian. My entire bundle
patches start at U10-1 so if your
window is not maximized you will
not see them. Maximize the
window or scroll down until you
see U10-1. My patches go from
U10-1 to U24-4. My indivdual
patches start at U40-1 thru U43-3
Once the patches are in the
Librarian, go to your GT-10 and
select a patch you would like to
over-write. Then in the Librarian
hit the "Temporary Write" button
next to the patch you want to
audition, this will temporarily load
that patch into your GT-10. If you
like it and want to keep it hit the
"Write" button again and this will
permanently install the patch to
that location on your GT-10.
Line6 POD X3-Live Patches
Line6 POD XT-Live & X3-Live
Instructions
Here are my Album and MP3 download links. You can preview every song
on all of my albums:
Here are the iTunes links if you prefer. These wil automatically open iTunes:
Here you can preview patches from the Line6 POD X3-Live and the Boss GT-10.
For the Line6 patches you will need Gearbox (free download from Line6 website).
For the Boss GT-10 you will the Boss Librarian software (free download from the
Boss website). See the instructions on the side panel for your product.
Equipment used for recording samples:
Paul Reed Smith Limited Edition model recorded in stereo at 24bit / 44.1Khz.
Mp3 audio samples:
(click the links below)
Download Patch:
(right-click and “Save Target As”)
(THIS FILE IS A ZIP FILE. YOU MUST
UNZIP IT BEFORE IMPORTING IT
INTO YOUR GT-10)
Boss GT-10 Instructions
These are the patches I am
currently using in my live set!
My entire bundle has some
differnet patches not shown here
Mp3 audio samples:
(click the links below)
Download Patch:
(right-click and “Save Target As”)
Once downloaded, REMOVE THE .zip
FROM THE END OF THE FILE.
(It should end in l6t)
My entire bundle has some
differnet patches not shown here
(right-click and “Save Target As”)
Once downloaded, REMOVE THE .zip
FROM THE END OF THE FILE.
(It should end in X3m)
(right-click and “Save Target As”)
This is my entire XTL Bundle!
THIS IS A TRADITIONAL ZIP FILE. ONCE
DOWNLOADED USE WINZIP TO UNZIP THE FILE.
THEN YOU CAN INPORT THE TONES INTO YOUR
POD XT-LIVE USING THE INSTRUCTIONS.
Mp3 audio samples:
(click the links below)
(right-click and “Save Target As”)
These are the artists patches plus a few more!
THIS IS A TRADITIONAL ZIP FILE. ONCE
DOWNLOADED USE WINZIP TO UNZIP THE FILE.
THEN YOU CAN INPORT THE TONES INTO YOUR
POD XT-LIVE USING THE INSTRUCTIONS.
Download Patches:
My entire bundle has some
differnet patches not shown here
